Home / Collections / Home page / ICU CCU Vital Signs Patient Monitor HD12 | DAWEI

ICU CCU Vital Signs Patient Monitor HD12 | DAWEI

$1,479.00
| /

ICU CCU Vital Signs Patient Monitor HD12 | DAWEI

$1,479.00
| /
description
  1. HD12-1 Set, Including standard accessories: 1 five-lead wire (including 10 electrode pads), 1 finger-clip blood oxygen probe, 1 blood pressure connecting tube, 1 Adult Reusable NIBP Cuff, 1 temperature probe.
  2. 12.1 inch color LCD, full view display, high resolution 1280*800dpi;
  3. 12.1 inch capacitive touch screen, suitable for use in complex environment (optional);
  4. Support BIS module, easy and quick installation of card slot;
  5. Standard parameters: ECG, SpO2,NIBP,RESP, Temperature, Heart rate;
  6. Fully discrete module: ECG, SpO2, NIBP, motherboard and power supply are each a separate PCB, easy to maintenance and upgrade;
  7. Optional for international mainstream module such as Masimo SpO2, SunTech NIBP etc.
  8. 20 kinds of arrhythmia event alarm, support ST segment analysis function;
  9. The brightness of the screen can be adjusted to 10 levels;
  10. Double overpressure protection from NIBP software and hardware to ensure patient safety;
  11. Multiple interface display, standard interface, large font, respiratory oxygenation diagram, trend coexistence, seven ECG calculation leads displayed on the screen
  12. 3 language operation interface, friendly operating system, convenient operation of patient information input, delete and save;
  13. Parameter color adjustment function, medical staff can define the color of background, waveform and font;
  14. International standard, sound and light double three-level alarm, more safe and more professional;
  15. Extra long alarm light strip, multi-angle visible, easy to obtain alarm information;
  16. Independent alarm tone and pulse tone, when the alarm tone is silent, the pulse tone continues to correspond. When the pulse tone is silent, the alarm tone can be activated normally;
  17. Adjustable volume with 5 levels;
  18. Anti-fibrillation, electric knife, power grid, electromyography interference
  19. Large capacity built-in lithium battery, continuous working time not less than 300 minutes;
  20. When the waveform screen is frozen, real-time parameters are continuously displayed in the parameter area.The frozen waveform can be flipped back and forth along the time axis.
  21. AC power indicator, working status indicator, real-time electricity detection;
  22. Low battery power alarm, critical moment will not lose data;
  23. Large storage capacity: at least 1200 hours of continuous patient monitoring data storage;
  24. Support USB configuration for fast import/export, to meet the needs of different departments
  25. Support USB firmware upgrade, good maintainability;
  26. Support central monitoring system screenshot HL7 protocol;
  27. Support WIFI, Bluetooth and other transmission functions
  28. HDMI HD video output;
  29. Optional for built-in thermal matrix recorder, three trace waveform
  30. PMOS operating system, rapid response;
  31. Very short boot time, 10 seconds into the working state;
  32. Reserved ETCO2 interface to support plug-and-play CO2 module;
HD12 Patient Monitor - Performance
1. Support Chinese, English, Italian, Spanish, Portuguese, Turkish;
2. Fully discrete modules, (ECG, blood oxygen, blood pressure motherboard, power supply are independent PCB, performance guarantee, easy maintenance and upgrade);
3. The screen display brightness can be adjusted to 10 levels, which can be used in different places of use;
4. Parameter color adjustment function, medical staff can customize the color of background, waveform and font;
5. Very short boot time, 10 seconds into the working state;
6. Low-power fanless design, battery life ≥ 300 minutes;
7. Support the central monitoring system;
8. Support remote upgrade, support online upgrade and U flash drive upgrade;
9. Integrated printing module, the printing font is clear and silent.

 

ICU CCU Vital Signs Patient Monitor HD12  DAWEI  (1)
ICU CCU Vital Signs Patient Monitor HD12  DAWEI  (2)

Standard configuration: ECG, SpO2, NIBP, RESP, Temperature, Heart rate;

Optional configuration: Printer, touch screen, 3/5/12 leads ECG, masino SpO2, suntech NIBP, AG,C.O.,BIS

 

ECG:

Leads: 3/5 leads; most 7 ECG calculation leads can be displayed on the screen

Ⅰ、Ⅱ、Ⅲ、AVR、AVL、AVF、V leads

Measuring range:20~300bpm

Resolution:1bpm

Accuracy:the bigger one between ±2% or ±2bpm

Frequency response:0.67Hz-40 Hz

S-T segment monitoring:-2.0mV~2.0mV

Electrode drop indication:sound and light indicator

Sweep rate:6.25、12.5、25、50mm/sec

Gain :×0.125、×0.25、×0.5、×1、×2、×4、Auto

Electrical calibration:1mV+5%

Protection isolation withstands 4000V/AC/50Hz

Lead cable:3/5 lead

Standard configuration:universal adult ECG cable

Optional configuration:special ECG cable for Neonate and Pediatric

Alarm: upper and lower limits of alarm value can be set, automatic memory; alarm review

 

SpO2:

Display: SpO2 value, pulse column figure, waveform, pulse value

Measuring range: 0%-100% adult/pediatric/neonatal

Resolution: 1%

Precision: ±3% (less than 70% is not defined)

Pulse Rate:

     Measuring range:30~280bpm

Pulse precision:±2bpm

Alarm range: 20~300bpm, the lower limit can not be greater than the upper limit         

Sensor:

Standard configuration: adult finger clip

Optional configuration:pediatric finger clip, neonatal finger clip

Alarm value: the upper and lower limit can be set, automatic memory

 

NIBP:

Method: Oscillometric

Measuring parameter: Systolic pressure, Diastolic pressure, Mean pressure

Mode: Manual, Auto, STAT

Unit: optional for mmHg/ KPa

Measurement interval time of automatic measurement mode: 2.5~120min ten-level adjustable

Overpressure protection: software and hardware overpressure protection

Measuring range:

 

Adult

Pediatric

Neonatal

SYS(mmHg)

40~255

40~200

40~135

DIA(mmHg)

20~205

20~150

20~100

MEAN(mmHg)

27~220

27~165

27~110

 

Cuff pressure range: 0-300 mmHg

Cuff:    

Standard configuration: adult cuff

Optional configuration: neonatal cuff, pediatric cuff

Alarm setting range:

SYS:40~255mmHg, the lower limit can not be greater than the upper limit (adult),

        40~200mmHg, the lower limit can not be greater than the upper limit (pediatric),

        40~135mmHg, the lower limit can not be greater than the upper limit (neonatal);

DIA:10~195mmHg, the lower limit can not be greater than the upper limit (adult),

        10~150mmHg, the lower limit can not be greater than the upper limit (pediatric),

        10~110mmHg, the lower limit can not be greater than the upper limit (neonatal);

MEAN:20~215mmHg, the lower limit can not be greater than the upper limit (adult),

        20~165mmHg, the lower limit can not be greater than the upper limit (pediatric),

        20~125mmHg, the lower limit can not be greater than the upper limit (neonatal);

Alarm display error: Not greater than ±5% of the set value

 

Temperature:

Measuring Range:15℃~50℃

Measuring error: not more than ±0.1℃

Resolution:0.1℃

Accuracy:±0.2℃ (including sensor)

Probe:

Standard configuration: permanent body temperature probe

Optional configuration: Esophageal temperature probe, rectal temperature probe

Alarm value: the upper and lower limit can be set, automatic memory

Alarm: all monitoring parameters can be set for alarm, and it has a sound and light alarm device, and can cancel the alarm

 

RESP:

Method: the thorax impedance method

PR Measurement Range and Accuracy

Measurement range: Adult: 0~ 120rpm

                 Pediatric/Neonatal: 0~150rpm

Measurement Accuracy:10~150 rpm the bigger one between ±2 rpm or ±2%;

                    0~9 rpm not define.

PR measurement resolution

Resolution: 1 rpm

Suffocation alarm delay time

Set as:20s、25s、30s、35s、40s、45s、50s、55s、60s

PR alarm limit range

Adult neonatal/pediatric alarm limit can be set to: 2~150rpm