ECG machine ME03/06/12 - FAQs and Tips

How will I conduct this machine?

  • A paper version of the Quick Operation Guide will be in the shipment
  • PDF of the User Manual
  • Free training
  • Online support

ECG waveform interface after connecting to the workstation

ECG waveform interface after connecting to the workstation

What are the functions in the settings interface?

✅Click the [Settings] icon on the navigation interface, and the machine enters the setting interface.
✅ Settings include: system settings, sampling settings, analysis settings, print settings, hospital information.

How to perform a 12-lead ecg?

An ECG stands for electrocardiogram. It is a tool used to detect a wide range of heart dysrhythmias using waveforms on a monitor. It is used by healthcare providers regularly both in the hospital and by EMS.

Read more: Simple Steps for 12-lead ECG Application

How to connect lead cables?

✅The lead wires include 6 chest leads and 4 limb leads.
✅Users can distinguish the chest leads from the limb leads by the color of the lead wires and the logo on the electrode plug.
✅Connect the lead wire: Insert the lead wire plug into the cable socket (Patient) on the right side of the electrocardiograph, and tighten the knobs on both sides of the plug.

How to connect lead cables?

How to install Thermal Recording Paper?

The installation steps of printing paper are as follows:
1) Press the button of the paper compartment cover on the left side of the machine to pop up the paper compartment cover;
2) Take off the packaging of the new reel recording paper, put the printing paper inside the paper reel, and place it in the printing paper compartment;
3) Pull out the recording paper about 2cm, insert the printer cover horizontally and press the printer cover firmly.
Note: Thermal paper can only be printed on one side, if the thermal paper is installed backwards, the information will not be printed normally. Judgment method: After pulling out the thermal paper and closing the cover of the paper compartment, pull the thermal paper to the left, and the ECG grid should be facing up.

We provide the following seven types of power cords:

US plug, UK plug, EU plug, IT plug, SA plug, IL plug, Great SA plug
Please note the required power cord version in the order. If there is no note, the power cord version will be selected according to the country where the order is shipped.